Skip to main content
Washing machine's door can be opened and water runs out
AEG Support

Washing machine's door can be opened and water runs out

Issue
  • Washing machine's door can be opened and water runs out onto the floor. It happens when a wash cycle with a "Rinse Hold" option was chosen and the machine was turned off by using the cycle selector or disconnecting it from the power.
Applies to
 
  • Front loaded washing machine
Resolution

1. Start a draining cycle before turning off the machine and opening the door, otherwise the water will run out onto the floor.

2. Contact an Authorized Service Centre

If the door can be opened with water in the machine and the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.

NOTE: Depending on the problem, you may be charged for a service visit by an engineer, even during the warranty period.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.