Skip to main content
AEG Support


Refer to Safety chapters.


icon-info.png Refer to the assembly instructions for the installation.

To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet.


This appliance can be installed in a dry, well ventilated indoor where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance:

Climate class

Ambient temperature


+10°C to + 32°C


+16°C to + 32°C


+16°C to + 38°C


+16°C to + 43°C

icon-info.png Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.

Ventilation requirements

The airflow behind the appliance must be sufficient.


Electrical connection

  • Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.

  • The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.

  • The manufacturer declines all responsibility if the above safety precautions are not observed.

  • This appliance complies with the E.E.C. Directives.

  • Was this article helpful?