Skip to main content
AEG Support


Refer to Safety chapters.


If you are discarding an old appliance that has a lock or catch on the lid, you must ensure that it is made unusable to prevent young children being trapped inside.

This appliance can be installed in a dry, well ventilated indoor where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance:

Climate class

Ambient temperature


+10°C to + 32°C


+16°C to + 32°C


+16°C to + 38°C


+16°C to + 43°C

icon-info.png Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Service Centre
icon-info.png The appliance shall have the plug accessible after installation.

Electrical connection

  • Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.

  • The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.

  • The manufacturer declines all responsibility if the above safety precautions are not observed.

  • This appliance complies with the E.E.C. Directives.

Ventilation requirements

The airflow behind the appliance must be sufficient.

  1. Put the freezer in horizontal position on a firm surface. The cabinet must be on all four feet.
  2. Make sure that the clearance between the appliance and rear wall is 5 cm.
  3. Make sure that the clearance between the appliance and the sides is 5 cm.
  • Was this article helpful?