Skip to main content
Before first use
AEG Support

Before first use

Refer to Safety chapters.

Initial Cleaning

Remove all accessories and removable shelf supports from the appliance.

icon-info.png Refer to "Care and cleaning" chapter.
Clean the appliance before first use.

Put the accessories and the removable shelf supports back to their initial position.

Setting the time

You must set the time before you operate the oven.

When you connect the appliance to the electrical supply or after a power cut the display flashes automatically.

  1. Press the selection button GUID-959B91BB-00DD-4504-B861-ED335689C4CC-preview_v1.png.
    The timer activate symbol comes on.
  2. Use GUID-0139CD69-5CDC-47FA-96EA-743E541F1046-preview_v1.png or GUID-982D1D2C-B1A1-491B-B24E-247FECFFF4CD-preview_v1.png button to set the correct time of day.

    After approximately five seconds, the flashing stops and the display shows the time of day you set.

To change the time, activate the appliance and press GUID-0139CD69-5CDC-47FA-96EA-743E541F1046-preview_v1.png and GUID-982D1D2C-B1A1-491B-B24E-247FECFFF4CD-preview_v1.png at the same time or GUID-959B91BB-00DD-4504-B861-ED335689C4CC-preview_v1.png.

When the colon between the hours and minutes flashes, press GUID-0139CD69-5CDC-47FA-96EA-743E541F1046-preview_v1.png or GUID-982D1D2C-B1A1-491B-B24E-247FECFFF4CD-preview_v1.png to set the new time.


Preheat the empty appliance to burn off the remaining grease.

  1. Set the function GUID-785C5492-E9F9-47C4-A489-C59792023108-preview_v1.png and the maximum temperature.
  2. Let the appliance operate for 1 hour.
  3. Set the function GUID-F4763F9C-5840-4D60-AA46-7E295B6E5C28-preview_v1.png and set the maximum temperature.
    The maximum temperature for this function is 210 °C.
  4. Let the appliance operate for 15 minutes.
  5. Set the function GUID-FC36F8F7-D1E3-49B5-9162-3279C6BBEEC2-preview_v1.png and set the maximum temperature.
  6. Let the appliance operate for 15 minutes.

Accessories can become hotter than usual. The appliance can emit an odour and smoke. This is normal. Make sure that the airflow in the room is sufficient.

  • Was this article helpful?